Products

Teknor T944V/500_2-000 Full-size CPU Board with Video, LAN

Teknor T944V/500_2-000 Full-size CPU Board with Video, LAN

Kontron 01023-0000-17-5 MOPS686+ CPU Board

• Fanless 166 MHz Pentium® MMX™, up to 266 MHz (fan)
• Onboard PCI graphic, LAN, USB, COM, LPT, IDE, FDC.
• Visualisation and Communication

Kontron 01023-0000-17-4PH3 PC/104-plus CPU Board. MOPS/686+ Intel Pentium 166MHz | Intel 551ER Ethernet | fanless PC/104 | PC/104-Plus CPU Board with SODIMM-socket | 10/100 MBit-Ethernet | 2x RS232C | USB | LPT | FDC | IDE | Keyboard

Teknor PCI944/DXA-01 CPU Board. Full Size | Intel Pentium II Support | PC/104 Plus Expansion | COM | Parallel | USB | SCSI (Option) | Video (Option)

Kontron 01023-0000-17-4 CPU Board. MOPS/686+ Intel Pentium 166MHz | Intel 551ER Ethernet | fanless PC/104 | PC/104-Plus CPU Board with SODIMM-socket | 10/100 MBit-Ethernet | 2x RS232C | USB | LPT | FDC | IDE | Keyboard

Kontron 01023-0000-17-4 PC104-plus CPU Board | Embedded Single Board Compu...

Aaeon PCM-6893 REV:1.1-B CPU Boards | Industrial Single Board Computer (SBC) | Socket 370 Supports Intel Pentium III / Celeron Microprocessors up to 1.4GHz | 36-bit Dual Channel TTL/LVDS Interface | TV-Out Function, 10/100Mbps Fast Ethernet

BVM FS-979 CPU Boards-Full-size PICMG Pentium 4 Platform-Intel Pentium 4 LGA775 with DDRII Onboard VGA, LAN, USB2.0, DVI SATA, AC97 Audio

IEI ROCKY-4786EVG-R30 CPU Board; PICMG Single Board Computer with Socket 478 | 800MHz FSB | VGA | LAN | GbE | USB2.0 | Serial-ATA | Audio (Rev. 3.0)

• 1x 10/100Mbps i82562ET Ethernet, 1x 10/100/1000Mbps i82547 Ethernet by CSA
• 2x 10/100Mbps i82559 Ethernet (ROCKY-4786E2V)
• ATX power control function : meet ACPI 1.1
• Compact Flash Type socket
• Hardware monitoring (CPU Vcore ; CPU/System Fan speed and Thermal)
• Integrated in Intel 865G
• Intel 865G + ICH5
• Socket-478 for Intel Pentium 4 with 533/800MHz FSB

• Form Factor: PICMG
• ISAPlus: Design to enhance the ISA bus drive capability(64mA)
• Audio: AC’97 CODEC
• Bus: AGP 4X/8X
• Chipset: Intel 865G + ICH5
• CPU: Socket-478 for Intel Pentium 4 with 533/800MHz FSB
• Ethernet: 1x 10/100Mbps i82562ET Ethernet; 2x 10/100Mbps i82559 Ethernet (ROCKY-4786E2V)
• Operating Humidity: 5~95%, non-condensing
• Operating Temperature: 0 - 60°C (CPU need cooler)
• Power Consumption: 5~95%, non-condensing, +5V@6.98A (P4 3.3GHz FSB 800MHz; Dual channel DDR400 512mb SDRAM)
• SSD: 1xCompact Flash Type ?socket
• System Memory: Dual channel DDR 333/400 SDRAM socket support up to 2GB
• Watchdog Timer: software programmable, support 1~255 second system reset

IEI ROCKY-4786EVG-R30 CPU Board | PICMG Single Board Computer with Socket 478 | 800MHz FSB | VGA | LAN | GbE | USB2.0 | Serial-ATA | Audio (Rev. 3.0)

RadiSys Corporation 56-309-0111, 34500-002, 061-31322-022 PICMG Full Size PCI/ISA Dual Slot 1 Pentium III Processor Industrial CPU Board

Radisys 34500-002 PICMG Full Size PCI/ISA Dual Slot 1 Pentium III Processor CPU Board

TEXAS MICRO 31337-002 Texas Micro 31337-002 Single Board Computer - Dual Slot 1 Support, SCSI, PS/2

Dell 06P791 CPU Board

Emerson ATCA-7105/7107 ATCA Processor Blade | CPU Board

Designed for PICMG® 3.0 and 3.1 AdvancedTCA® compliant systems, the Emerson Network Power ATCA-7105/7107 processor blade features the 1.8 GHz Intel® Pentium® M processor with a high MIPS/watt capability in an 8U form factor. The processor delivers outstanding performance and supports light I/O and/or coprocessing via PMC sites; making it ideal for implementing almost any control plane applications. It also includes an Intel® E7501 chipset with a memory bandwidth of 4.3GB/s, accommodates four PMC modules for additional processing power and/or I/O, and supports 4GB ECC-protected DDR266 SDRAM.

The ATCA-7105/7107 blades are RoHS (5 of 6) compliant, eliminating the need for customers to incur the time, resource and expense associated with creating and/or converting existing product to meet this international requirement. The ATCA-7105/7107 blade features a managed, multi-layered 16-port Gigabit Ethernet switch that delivers the flexibility required for routing Gigabit Ethernet interfaces between the base board control processor, the PMC-based processing or I/O nodes, and the PICMG compliant base and fabric interfaces on the ATCA-7107.

The ATCA-7105/7107 is available in two memory configurations (2GB and 4GB) and supports optional, on-board parallel and serial ATA hard drive devices; adding to the performance and flexibility of this processor blade.

Texas Micro P3550DBX2-512-E512 CPU Board| PICMG Single Board Computer

Protech PC-620-G4RCF, PC-620-G4, 620-G4D CPU Board. Full-size | Intel Celeron/Pentium III Support | VGA | LAN | SCSI | USB Revision G4D Simple Type: CPU Board

• Socket 370 support for Intel P3 and Celeron
• SCSI: Built-in Adaptec 7890
• Intel 440BX Chipset
• Realtek RTL8139 Fast Ethernet
• Display
• PC/104
• Two high speed 16550 Compatible UARTs
• Watch Dog Timer

• BIOS:
  • Phoenix-Award PnP BIOS, Flash ROM, with VGA BIOS
• Bus Interface
  • ISA/PCI (PICMG Spec), PC/104 Bus
• Cache:
  • Built-in CPU
• Chipset Intel: 440BX
• CMOS:
  • Real Time Clock/Calendar
• CPU:
  • Intel Celeron/P-III processors
• CPU Frequency:
  • 300MHz~1GHz & up reserved
• CPU Voltage:
  • Auto detect
• Dimension:
  • 338.5mm x 122mm, 13.33" x 4.8"
• DRAM:
  • 2 x 168-pin DIMM up to 512MB
• FDD Interface: 1
• Green Function:
  • Controlled by hardware & software
• Hardware Monitor: Optional
• I/O Chipset:
  • SMC 669
• IDE Interface: 2 x EIDE (UDMA-33)
• Keyboard:
  • Mini DIN connector & external connector
• LAN:
  • Realtek RTL8139C, 10/100 Base-TX Ethernet, 1 x RJ-45 Jack, support Wake-on-LAN with ATX power
• Mouse: Mini DIN connector (selectable w/ KB/Y-cable)
• Parallel Port:
  • 1 x parallel (SPP/EPP/ECP)
• Power Requirement: +5V and +12V
• Power Supply:
  • support AT/ATX power
• Processor: Intel Pentium III
• SCSI: Adaptec 7890, SCSI II & Ultra-II wide SCSI
• Serial Port:
  • 2 x 16550 UART, COM2 for RS232/422/485
• Speaker:
  • Internal buzzer & external speaker connector
• SSD: 32-pin socket supports DOC up to 144MB
• USB: 2 x USB 1.1
• VGA:
  • C&T 69000, 2M DRAM for CRT & LCD
• Watchdog: 16 level Watchdog Time w/ reset/NM

Radisys GL815E CPU Board. ATX | Intel 815E Chipset | PCI/ISA Motherboard

Endura motherboards are Intel® architecture motherboards designed specifically to meet the demands of the OEM embedded marketplace. Based on chipsets supplied by the Embedded Intel Architecture Division, Endura motherboards have an extended lifetime, unlike commercial motherboards which have typical lifetimes of six to twelve months. Combined with high quality design and manufacture, engineering change control, engineering support and product life cycle management,Endura motherboards provide the ideal solution for an embedded system where long lifetime and low cost of ownership are paramount. Endura motherboards also offer continued support for legacy features such as standard serial interfaces and hard-switched power supplies, which remain important for embedded applications.

The GL815E is a standard form factor, ATX motherboard that is well suited to embedded applications. It is available with either Intel CeleronTM or Pentium® III processor in FC-PGA package providing scalable performance and the option to chose the appropriate price/performance point to suit the application. The high degree of integration and rich feature set provides a platform that is ideal for low cost system design. The GL815E is designed for use in applications with a need for high performance graphics, which can be supported either with the integrated 815E video or by upgrading to a high performance AGP graphics card in the 4X AGP slot. Available in different build configurations, the GL815E is used in telecom, datacom, medical, transaction terminals (such as coin-op gaming) and industrial automation applications.

• Intel 815E chipset
• Integrated VGA
• Celeron processor in flip-chip (FC-PGA) package
• Intel Pentium III processor in (FC-PGA) package
• Up to 512MB SDRAM
• System Management
• Intel 10/100 Ethernet PanelLinkTM flat panel interface
• DFP and DVI monitor support
• AC97 audio
• Fan control
• Eight GPIO lines
• Four PCI slots
• One ISA slot
• One shared PCI/ISA slot
• 4X AGP slot
• One parallel port
• Two serial ports
• Four USB ports
• PhoenixBIOSTM
• Connectors for iternal cabling
• 12" x 7.5"
• ATX 2.03 compliant
• ROHS Compliant

Radisys 97-9002-02 GL815E CPU Board. ATX | Intel 815E Chipset | PCI/ISA Motherboard

Endura motherboards are Intel® architecture motherboards designed specifically to meet the demands of the OEM embedded marketplace. Based on chipsets supplied by the Embedded Intel Architecture Division, Endura motherboards have an extended lifetime, unlike commercial motherboards which have typical lifetimes of six to twelve months. Combined with high quality design and manufacture, engineering change control, engineering support and product life cycle management,Endura motherboards provide the ideal solution for an embedded system where long lifetime and low cost of ownership are paramount. Endura motherboards also offer continued support for legacy features such as standard serial interfaces and hard-switched power supplies, which remain important for embedded applications.

The GL815E is a standard form factor, ATX motherboard that is well suited to embedded applications. It is available with either Intel CeleronTM or Pentium® III processor in FC-PGA package providing scalable performance and the option to chose the appropriate price/performance point to suit the application. The high degree of integration and rich feature set provides a platform that is ideal for low cost system design. The GL815E is designed for use in applications with a need for high performance graphics, which can be supported either with the integrated 815E video or by upgrading to a high performance AGP graphics card in the 4X AGP slot. Available in different build configurations, the GL815E is used in telecom, datacom, medical, transaction terminals (such as coin-op gaming) and industrial automation applications.

• Intel 815E chipset
• Integrated VGA
• Celeron processor in flip-chip (FC-PGA) package
• Intel Pentium III processor in (FC-PGA) package
• Up to 512MB SDRAM
• System Management
• Intel 10/100 Ethernet PanelLinkTM flat panel interface
• DFP and DVI monitor support
• AC97 audio
• Fan control
• Eight GPIO lines
• Four PCI slots
• One ISA slot
• One shared PCI/ISA slot
• 4X AGP slot
• One parallel port
• Two serial ports
• Four USB ports
• PhoenixBIOSTM
• Connectors for iternal cabling
• 12" x 7.5"
• ATX 2.03 compliant
• ROHS Compliant

Radisys 97-9510-20 97-9002-02 GL815E CPU Board. ATX | Intel 815E Chipset | PCI/ISA Motherboard

Endura motherboards are Intel® architecture motherboards designed specifically to meet the demands of the OEM embedded marketplace. Based on chipsets supplied by the Embedded Intel Architecture Division, Endura motherboards have an extended lifetime, unlike commercial motherboards which have typical lifetimes of six to twelve months. Combined with high quality design and manufacture, engineering change control, engineering support and product life cycle management,Endura motherboards provide the ideal solution for an embedded system where long lifetime and low cost of ownership are paramount. Endura motherboards also offer continued support for legacy features such as standard serial interfaces and hard-switched power supplies, which remain important for embedded applications.

The GL815E is a standard form factor, ATX motherboard that is well suited to embedded applications. It is available with either Intel CeleronTM or Pentium® III processor in FC-PGA package providing scalable performance and the option to chose the appropriate price/performance point to suit the application. The high degree of integration and rich feature set provides a platform that is ideal for low cost system design. The GL815E is designed for use in applications with a need for high performance graphics, which can be supported either with the integrated 815E video or by upgrading to a high performance AGP graphics card in the 4X AGP slot. Available in different build configurations, the GL815E is used in telecom, datacom, medical, transaction terminals (such as coin-op gaming) and industrial automation applications.

• Intel 815E chipset
• Integrated VGA
• Celeron processor in flip-chip (FC-PGA) package
• Intel Pentium III processor in (FC-PGA) package
• Up to 512MB SDRAM
• System Management
• Intel 10/100 Ethernet PanelLinkTM flat panel interface
• DFP and DVI monitor support
• AC97 audio
• Fan control
• Eight GPIO lines
• Four PCI slots
• One ISA slot
• One shared PCI/ISA slot
• 4X AGP slot
• One parallel port
• Two serial ports
• Four USB ports
• PhoenixBIOSTM
• Connectors for iternal cabling
• 12" x 7.5"
• ATX 2.03 compliant
• ROHS Compliant