Products

IEI JUKI-760E PICMG CPU Boards | Full-size Single Board Computer (SBC) | Socket 7 Supports Intel Pentium MMX up to 233MHz, AMD K6-3 up to 500MHz, 100/95/83.3/75/66MHz FSB Microprocessors | with ALi M1541 System Chipset, CHIPS 65555 Graphics Controller, Re

• 10/100Mbps Ethernet
• Ali M1541/1543 Chipset
• C&T 69000 HiQPro LCD/CRT Chipset
• DiskOnChip

Aaeon PCM-3524 LVDS Transmitter/Receiver Module

The LVDS Module is a interface devices specifically configured to support data transmission from graphics controller to LCD panels. The technology employed, LVDS (Low Voltage Differential Signaling), is ideal for high speed, low power data transfer. This enables the implementation of high end displays such as SVGA (800 x 600) and XGA (1024 x 768).

The predominant issues limiting performance in these high end displays are speed, power, and EMI considerations. The user is also concerned with the physical interface to the display; the fewer wires the better. The LVDS Module addresses these issues with LVDS technology and muxing TTL signals to higher speed LVDS signals which allows a substantially narrower interface between host and display. In a typical application (see figure 1), TTL-level RGB and control data from the graphic controller arrives at the inputs of the LVDS transmitter module. The parallel TTL data is muxed and converted to LVDS. The outputs of the LVDS transmitter module drive the LVDS data on the cable which connects the motherboard to the display. The LVDS data traverses the cable to the LVDS receiver module at the display.

The received data is then demuxed, converted back to TTL levels and sent to the inputs of the timing controller. This muxing of parallel TTL signals allows the data to travel at faster speeds across a narrow interface, addressing needs associated with high bandwidth communication

Features

PICMG CPU Board

Versalogic COBRA EBX Single Board Computer

• Up to 1.8 GHz Pentium® M processor
• Extreme Graphics 2 video
• High speed DDR RAM
• CompactFlash socket
• Dual Gigabit Ethernet version
• Standard and extended temp versions
• RoHS-compliant

The Cobra belongs to a new class of embedded computers offering higher processing performance with lower power consumption, extreme graphics capability and enhanced ruggedization. The advanced design makes it suitable for a wide range of higher-end applications with demanding speed and graphics requirements, including gaming devices, information kiosks, telecommunications devices and advanced security systems. In addition, its PC architecture and small footprint make it an excellent choice for traditional embedded applications.

The system is built around the M-series processors, and their companion chipset, the 855GME with integrated Extreme Graphics 2 and audio functions. The Pentium M version Cobra incorporates a number of power saving features, including the SpeedStep technology, and performance enhancing features such as a large 1 MB level 2 cache. The advanced graphics controller provides exceptionally sharp images, ultra-fast rendering, and smooth sequencing to produce realistic 3-D graphics and animation.

The board features two SODIMM sockets, which support up to 2 GB of system RAM. The rugged, low-profile RAM sockets provide more reliable operation in applications subject to shock and vibration. The DDR (Double Data Rate) RAM interface provides fast memory access and increased system throughput.

Like all VersaLogic products, the Cobra is designed and guaranteed for long-term availability. From application design to continuing production, it provides a cost-effective solution with low total cost of ownership. The Cobra is manufactured to the highest quality standards, and is backed with excellent technical and engineering support. Customization is available in quantities as low as 100 pieces.

The Cobra features an Intel Pentium M or ULV Celeron M processor and 855 GME chipset to The Cobra features an Intel Pentium M or ULV Celeron M processor and 855 GME chipset to provide main processing, device support, and analog or flat panel video output. The system is complemented by a wide array of I/O devices for communication with peripherals, networked systems and specialized devices. On-board I/O includes two Gigabit or 10/100 Ethernet ports, four USB 2.0 ports, RS-232 and RS-422/485 COM ports, CompactFlash socket, LPT port, digital I/O ports, counter/timers, field-reprogrammable BIOS, and optional A/D converter. The PC/104-Plus expansion site can accept a wide variety of PC/104 and PC/104-Plus I/O modules for additional expansion when needed. 

IEI ROCKY-3786 Series Full-size CPU Boards | PICMG 1.0 Single Board Computers (SBC) | with Socket 370 Supports Intel Coppermine/Tualatin Pentium III and Celeron Microprocessors with 66/100/133 MHz FSB

IEI ROCKY-3702EV-R4 CPU Board. PICMG bus | Socket-370 base CPU card | 4MB VGA | 10/100Mbps Ethernet | Ver.4

Radisys 713967-1 CPU Board

VOX TECHNOLOGIES 713967-1 StandAlone CPU Board with Intel Pentium M 2.0 with VGA, LAN, Parallel, Dual COM and Audio

Trenton 92-005721-0X Full Size CPU Board with Socket 370, Intel Pentium 111/Celeron Processor, SCSI, PICMG 1.0, VGA, LAN, SDRAM

IEI JUKI-752 CPU Board; Half Size | ISA Bus Interface | Maple 486DX4-100 | VGA/LCD | 2x RS-232

System

• CPU: ACC Maple, includes DX4-100 CPU
• DMA channels: 7
• Interrupt levels: 15
• Real-time clock/calendar: DS12887/BQ3287 or equivalent chip and quartzoscillator, 128B CMOS memory, powered by lithium battery for over 10 years of data retention

MemoryRAM

• memory: 512KB to 32MB, only supports single side 16-bit SIMM. Shadow RAM memory: System BIOS: 0F0000h ~ 0FFFFFh
• LCD/CRT Interface
• Chipset: TP6508
• Resolution: Supports up to 800 x 600 resolution for STN and TFT LCD Flat
• Panel, and 1024 x 768 x 256 colors for CRT display.
• Display Memory: 1 MB on board

Input/Output

• IDE hard disk drive interface: Supports up to two IDE hard disk drives. Can be disabled by BIOS Setup.
• Floppy disk drive interface: Supports two 2.88 MB, 1.44MB, 1.2MB, 720KB, or360KB floppy disk drives. Can be disabled by BIOS Setup.
• Two high speed Series ports: NS16C550 compatible UARTs with send/receive16-byte FIFOs, data rates are independently programmable from 115.2Kbaud down to 50 baud. Modem control circuitry

Multi-mode Parallel Port

• Standard mode— IBM PC/XT, PC/AT, PS/2 compatible bi-directional parallelport.
• Enhanced mode— Enhanced parallel port (EPP) compatible with IEEE 1284specification.
• High speed mode— Microsoft and Hewlett Packard extended capabilities port(ECP), compatible with IEEE 1248 specification

Industrial features

Watchdog timer: Can be set by 1,2,10,20,110,or 220 seconds period. Resetor NMI was generated when CPU did not periodically trigger the timer. Your program use hex 043 and 443 to control the watchdog and generate a system reset.

PC/104 expansion bus: A 64-pin and 40-pin, industrial embedded-PC bus standard. External power connector: 8-pin male connector (Molex 6410 series compatible)

Keyboard connector: A 5-pin header on board and 6-pin mini-DIN keyboard connector is located on the mounting bracket.

IEI PCISA-3716E2V-R3 PCISA bus CPU Boards | with Socket 370 Supports Intel Tualatin Pentium III / Celeron Microprocessors | with VGA, Audio & Dual Ethernet

IEI PCISA-37xx Series PCISA bus CPU Boards | with Socket 370 Supports Intel Tualatin Pentium III / Celeron Microprocessors | with VGA, Audio & Dual Ethernet