Products

Kontron 701-061 ETXexpress-MC COM Express CPU Board

Nexcom EBC 569 5.25" Embedded CPU Board | with on-board VIA C3 800MHz CPU

Axiomtek CAPA110 3.5" CPU Board | 3.5" Embedded SBC with AMD G-Series APU, AMD A50M, LVDS/DisplayPort/VGA, Dual LANs and Audio

• AMD G-Series APU dual core T56N (1.65 GHz)
• AMD A50M FCH
• 1 DDR3 SO-DIMM supports up to 4 GB memory capacity
• 2 SATA-600 supported
• 6 USB 2.0 ports
• 4 COM ports
• DirectX 11 support

Kontron 01023-0000-16-2 CPU Board. High Performance Intel Pentium MMX | 166/266 MHz | PCI Graphic for CRT and LCD | 128 MByte SDRAM | 256 MByte EIDE Flash chipDISK

Emerson 01-W3885F-01E MVME5500 VMEbus CPU Board

IEI ROCKY-4786EVG-R30 CPU Board; PICMG Single Board Computer with Socket 478 | 800MHz FSB | VGA | LAN | GbE | USB2.0 | Serial-ATA | Audio (Rev. 3.0)

• 1x 10/100Mbps i82562ET Ethernet, 1x 10/100/1000Mbps i82547 Ethernet by CSA
• 2x 10/100Mbps i82559 Ethernet (ROCKY-4786E2V)
• ATX power control function : meet ACPI 1.1
• Compact Flash Type socket
• Hardware monitoring (CPU Vcore ; CPU/System Fan speed and Thermal)
• Integrated in Intel 865G
• Intel 865G + ICH5
• Socket-478 for Intel Pentium 4 with 533/800MHz FSB

• Form Factor: PICMG
• ISAPlus: Design to enhance the ISA bus drive capability(64mA)
• Audio: AC’97 CODEC
• Bus: AGP 4X/8X
• Chipset: Intel 865G + ICH5
• CPU: Socket-478 for Intel Pentium 4 with 533/800MHz FSB
• Ethernet: 1x 10/100Mbps i82562ET Ethernet; 2x 10/100Mbps i82559 Ethernet (ROCKY-4786E2V)
• Operating Humidity: 5~95%, non-condensing
• Operating Temperature: 0 - 60°C (CPU need cooler)
• Power Consumption: 5~95%, non-condensing, +5V@6.98A (P4 3.3GHz FSB 800MHz; Dual channel DDR400 512mb SDRAM)
• SSD: 1xCompact Flash Type ?socket
• System Memory: Dual channel DDR 333/400 SDRAM socket support up to 2GB
• Watchdog Timer: software programmable, support 1~255 second system reset

IEI ROCKY-4786EVG-R30 CPU Board | PICMG Single Board Computer with Socket 478 | 800MHz FSB | VGA | LAN | GbE | USB2.0 | Serial-ATA | Audio (Rev. 3.0)

TEXAS MICRO 31337-002 Texas Micro 31337-002 Single Board Computer - Dual Slot 1 Support, SCSI, PS/2

Emerson ATCA-7105/7107 ATCA Processor Blade | CPU Board

Designed for PICMG® 3.0 and 3.1 AdvancedTCA® compliant systems, the Emerson Network Power ATCA-7105/7107 processor blade features the 1.8 GHz Intel® Pentium® M processor with a high MIPS/watt capability in an 8U form factor. The processor delivers outstanding performance and supports light I/O and/or coprocessing via PMC sites; making it ideal for implementing almost any control plane applications. It also includes an Intel® E7501 chipset with a memory bandwidth of 4.3GB/s, accommodates four PMC modules for additional processing power and/or I/O, and supports 4GB ECC-protected DDR266 SDRAM.

The ATCA-7105/7107 blades are RoHS (5 of 6) compliant, eliminating the need for customers to incur the time, resource and expense associated with creating and/or converting existing product to meet this international requirement. The ATCA-7105/7107 blade features a managed, multi-layered 16-port Gigabit Ethernet switch that delivers the flexibility required for routing Gigabit Ethernet interfaces between the base board control processor, the PMC-based processing or I/O nodes, and the PICMG compliant base and fabric interfaces on the ATCA-7107.

The ATCA-7105/7107 is available in two memory configurations (2GB and 4GB) and supports optional, on-board parallel and serial ATA hard drive devices; adding to the performance and flexibility of this processor blade.

Texas Micro P3550DBX2-512-E512 CPU Board| PICMG Single Board Computer

Radisys GL815E CPU Board. ATX | Intel 815E Chipset | PCI/ISA Motherboard

Endura motherboards are Intel® architecture motherboards designed specifically to meet the demands of the OEM embedded marketplace. Based on chipsets supplied by the Embedded Intel Architecture Division, Endura motherboards have an extended lifetime, unlike commercial motherboards which have typical lifetimes of six to twelve months. Combined with high quality design and manufacture, engineering change control, engineering support and product life cycle management,Endura motherboards provide the ideal solution for an embedded system where long lifetime and low cost of ownership are paramount. Endura motherboards also offer continued support for legacy features such as standard serial interfaces and hard-switched power supplies, which remain important for embedded applications.

The GL815E is a standard form factor, ATX motherboard that is well suited to embedded applications. It is available with either Intel CeleronTM or Pentium® III processor in FC-PGA package providing scalable performance and the option to chose the appropriate price/performance point to suit the application. The high degree of integration and rich feature set provides a platform that is ideal for low cost system design. The GL815E is designed for use in applications with a need for high performance graphics, which can be supported either with the integrated 815E video or by upgrading to a high performance AGP graphics card in the 4X AGP slot. Available in different build configurations, the GL815E is used in telecom, datacom, medical, transaction terminals (such as coin-op gaming) and industrial automation applications.

• Intel 815E chipset
• Integrated VGA
• Celeron processor in flip-chip (FC-PGA) package
• Intel Pentium III processor in (FC-PGA) package
• Up to 512MB SDRAM
• System Management
• Intel 10/100 Ethernet PanelLinkTM flat panel interface
• DFP and DVI monitor support
• AC97 audio
• Fan control
• Eight GPIO lines
• Four PCI slots
• One ISA slot
• One shared PCI/ISA slot
• 4X AGP slot
• One parallel port
• Two serial ports
• Four USB ports
• PhoenixBIOSTM
• Connectors for iternal cabling
• 12" x 7.5"
• ATX 2.03 compliant
• ROHS Compliant

Radisys 97-9002-02 GL815E CPU Board. ATX | Intel 815E Chipset | PCI/ISA Motherboard

Endura motherboards are Intel® architecture motherboards designed specifically to meet the demands of the OEM embedded marketplace. Based on chipsets supplied by the Embedded Intel Architecture Division, Endura motherboards have an extended lifetime, unlike commercial motherboards which have typical lifetimes of six to twelve months. Combined with high quality design and manufacture, engineering change control, engineering support and product life cycle management,Endura motherboards provide the ideal solution for an embedded system where long lifetime and low cost of ownership are paramount. Endura motherboards also offer continued support for legacy features such as standard serial interfaces and hard-switched power supplies, which remain important for embedded applications.

The GL815E is a standard form factor, ATX motherboard that is well suited to embedded applications. It is available with either Intel CeleronTM or Pentium® III processor in FC-PGA package providing scalable performance and the option to chose the appropriate price/performance point to suit the application. The high degree of integration and rich feature set provides a platform that is ideal for low cost system design. The GL815E is designed for use in applications with a need for high performance graphics, which can be supported either with the integrated 815E video or by upgrading to a high performance AGP graphics card in the 4X AGP slot. Available in different build configurations, the GL815E is used in telecom, datacom, medical, transaction terminals (such as coin-op gaming) and industrial automation applications.

• Intel 815E chipset
• Integrated VGA
• Celeron processor in flip-chip (FC-PGA) package
• Intel Pentium III processor in (FC-PGA) package
• Up to 512MB SDRAM
• System Management
• Intel 10/100 Ethernet PanelLinkTM flat panel interface
• DFP and DVI monitor support
• AC97 audio
• Fan control
• Eight GPIO lines
• Four PCI slots
• One ISA slot
• One shared PCI/ISA slot
• 4X AGP slot
• One parallel port
• Two serial ports
• Four USB ports
• PhoenixBIOSTM
• Connectors for iternal cabling
• 12" x 7.5"
• ATX 2.03 compliant
• ROHS Compliant

Radisys 97-9510-20 97-9002-02 GL815E CPU Board. ATX | Intel 815E Chipset | PCI/ISA Motherboard

Endura motherboards are Intel® architecture motherboards designed specifically to meet the demands of the OEM embedded marketplace. Based on chipsets supplied by the Embedded Intel Architecture Division, Endura motherboards have an extended lifetime, unlike commercial motherboards which have typical lifetimes of six to twelve months. Combined with high quality design and manufacture, engineering change control, engineering support and product life cycle management,Endura motherboards provide the ideal solution for an embedded system where long lifetime and low cost of ownership are paramount. Endura motherboards also offer continued support for legacy features such as standard serial interfaces and hard-switched power supplies, which remain important for embedded applications.

The GL815E is a standard form factor, ATX motherboard that is well suited to embedded applications. It is available with either Intel CeleronTM or Pentium® III processor in FC-PGA package providing scalable performance and the option to chose the appropriate price/performance point to suit the application. The high degree of integration and rich feature set provides a platform that is ideal for low cost system design. The GL815E is designed for use in applications with a need for high performance graphics, which can be supported either with the integrated 815E video or by upgrading to a high performance AGP graphics card in the 4X AGP slot. Available in different build configurations, the GL815E is used in telecom, datacom, medical, transaction terminals (such as coin-op gaming) and industrial automation applications.

• Intel 815E chipset
• Integrated VGA
• Celeron processor in flip-chip (FC-PGA) package
• Intel Pentium III processor in (FC-PGA) package
• Up to 512MB SDRAM
• System Management
• Intel 10/100 Ethernet PanelLinkTM flat panel interface
• DFP and DVI monitor support
• AC97 audio
• Fan control
• Eight GPIO lines
• Four PCI slots
• One ISA slot
• One shared PCI/ISA slot
• 4X AGP slot
• One parallel port
• Two serial ports
• Four USB ports
• PhoenixBIOSTM
• Connectors for iternal cabling
• 12" x 7.5"
• ATX 2.03 compliant
• ROHS Compliant

Radisys CE945GM CPU Board. Procelerant | Core Duo Pentium-M COM Express Module | 8x USB | PICMG COM Express Compliant | RoHS | Ethernet | Intel GMCH 945GM Chipset | Intel ICH7M Digital Home

RadiSys | CE945GM | Modules