Products

Panametrics 852PC Magna-Mike 8500 series optional Straight 3 ft (1 m) Probe Cable (for 802PR series)

Panametrics 802PR Magna-Mike 8500 series optional Probe with second function button for large test specimens

Olympus-NDT Panametrics 802PR-102 Magna-Mike 8500 series optional Probe.

The 802PR-102 probe is a standard probe with a standard 1/16" (1.6mm) radius tip. The tip, however, has been chemically hardened to help resist tip wear from abrasive materials. This probe is employed with the three (3) standard target balls.

Olympus-NDT Panametrics 802PR-105 Magna-Mike 8500 series optional Probe.

The 802PR-105 probe has a tip modified to fit into the groove of an automotive air-bag tear seam or similarly tight areas. The targets for these probes are 1/16" (1.6mm) diameter ball, a 3/16" (4.8mm) diameter disk with a sharp edge, and a 1/2" (12.7mm) diameter disk with a square 1/32" (0.79mm) wide edge. The disks are used exactly the same way as target balls, but align with the shape of the tip.

Panametrics 802PR-109 Magna-Mike 8500 series optional Probe, Extended Range capability to .400" (10 mm)

The 802PR-109 probe has a 1/4" (6.4mm) radius tip, and is used for measurements up to 0.400" (10mm). The targets employed with this probe are a 1/8" (3.2mm) diameter ball, a 3/16" (4.8mm) diameter ball and a 1/4" (6.4mm) diameter ball. The -109 is a type 6 probe.

Panametrics 802PR-110 Magna-Mike 8500 series optional Probe.

The 802PR-110 probe is the same as -109, except that the connector is mounted on the side, 90-degrees from its normal location.

Panametrics 802PR-111 Magna-Mike 8500 series optional Probe.

The 802PR-111 probe is a standard probe with a super-wear resistant material added to the tip. This probe uses standard targets.

Panametrics 802PR-112 Magna-Mike 8500 series optional Probe.

The 802PR-112 probe is the same as -111, except that the connector is mounted on the side, 90-degrees from its normal location.