StockCheck - Aggregating Everything
✓Product overview Woodhead SST

5136-DN-VME

Woodhead SST · DeviceNet Controllers

Woodhead SST 5136-DN-VME
Woodhead SST 5136-DN-VMEWoodhead SST 5136-DN-VMEWoodhead SST 5136-DN-VMEWoodhead SST 5136-DN-VME

Woodhead SST 5136-DN-VME overview

The SST DeviceNet interface card connects your VME bus computer to DeviceNet. Entire DeviceNet Protocol is implemented on the card UCMM capable, Group 1, 2, and...

Manufactured byWoodhead SST
Part number or family5136-DN-VME

Product details

Manufactured byWoodhead SST
Product groupDeviceNet Controllers
DescriptionThe SST DeviceNet interface card connects your VME bus computer to DeviceNet.
Key FeaturesEntire DeviceNet Protocol is implemented on the card UCMM capable, Group 1, 2, and 3 dynamic explicit connections supported Simultaneous execution of Group 2 Client (master) and Server (slave) operation All DeviceNet standard baud rates supported: 125, 250, and 500 Kbaud Full DeviceNet implementation including Change of State (COS) and explicit messaging DeviceNet compliance is ensured at the card level for I/O scanner and device applications Open memory map interface simplifies custom driver development and eliminates language compiler / operating system dependency
Typical ApplicationsThe following devices can be connected to DeviceNet using the SST VME interface card: VME based programmable controllers VME based motion controllers VME based computers
Custom Driver DevelopmentThe DeviceNet VME card interfaces with the host processor through shared memory. A documented host memory interface is provided and the card does not require external libraries, which simplifies custom driver development in your chosen operating system. DOS example programs with C source are included with each card to assist you with your software development.
Hardware SpecificationsDouble-height, single-width card using P1 connector Compatible with ANSI/IEEE Std. 1014 Responds to Standard Supervisory and Non-Privileged Address modifier codes Multiple cards can be configured in the same computer Configurable interrupt via dip switches DeviceNet compatible 5-pin DeviceNet connector DeviceNet compatible network status bicolor indicator Supports connection to non-powered (3 wire) CAN network external 12-24 VD C supply Compatible with CAN specification 2.0 part A Supports CAN data rates up to 1 Mbaud Supports all standard DeviceNet data rates: 125, 250 and 500 Kbaud 500 V network isolation Operation temperature: 0 to 50C (32 to 122°F) Storage temperature: -25 to 70C (-13 to 158°F) Power requirements: 5 V +/- 5% 500 mA (typical)

Manufacturer, product group, and supply

See who makes this product, where it belongs, and where available inventory may be listed.

Manufactured by Woodhead SST View Woodhead SST profile View Molex profile
Available from 1 marketplace offer Compare sellers and inventory


Where to buy


Total 1 item.
Green Eagle Logistics 5136-DN-VME
Verified marketplace seller
2 items available

1 New (Surplus) - Never used, not in Original Pack: $8500.00

1 TBD:

# Name
1 5136-DN-VME