StockCheck - Aggregating Everything
✓Product overview Pelco

RK5000PS-3U

Pelco ยท Modules

Pelco RK5000PS-3U
Pelco RK5000PS-3UPelco RK5000PS-3UPelco RK5000PS-3UPelco RK5000PS-3UPelco RK5000PS-3U

Pelco RK5000PS-3U overview

Pelco RK5000PS-3U Video Receiver Accessory | 19-inch rack mount chassis for 12 slots, no power (3 RUs) 3 Rack Units (RU) High Mount in Standard 19-Inch Rack Hot...

Manufactured byPelco
Part number or familyRK5000PS-3U
Product groupModules

Product details

Manufactured byPelco
Product groupModules
DescriptionPelco RK5000PS-3U Video Receiver Accessory | 19-inch rack mount chassis for 12 slots, no power (3 RUs)
Key Features3 Rack Units (RU) High Mount in Standard 19-Inch Rack Hot Swappable Internal Power Supply (RK5000PS-3U) Optional External Power Supply for Fiber Optic Modules Optional Blank Modules
OverviewThe RK5000PS-3U chassis has 12 empty slots that can hold single-width or double-width fiber optic modules or single-width UTP modules. The modules and the internal power supply are 3 RU high. The internal power supply powers all modules and can be replaced easily if it fails. The chassis is designed to mount into an EIA-standard, 19-inch rack.The RK5000-3U chassis has 14 empty slots. It does not include an internal power supply. A fully populated RK5000-3U chassis can be powered with the optional EPS5000-120 external power supply. The chassis is designed to mount into an EIA-standard, 19-inch rack. Optional single-width blank modules (RK5001B-3U) and double-width blank modules (RK5002B-3U) can be inserted into empty module slots.
Optional External Power SupplyThe EPS5000-120 external power supply can be used with fiber optic modules only. It is 1 RU high and has dual 120 W power supplies that slide into a tray. The external power supply can be mounted into a 19-inch, EIA-standard rack. The EPS5000-120 can be used in the following ways: Provide power to one fully populated RK5000-3U Provide power to two fully populated RK5000-3U Provide redundant power to one fully populated RK5000PS-3U Provide redundant power to two fully populated RK5000PS-3UThe relay output connector on the back of the EPS5000-120 is tied to the alarm LED. The alarm LED turns red when there is an alarm condition, such as the loss of the optical signal or the video signal. The relay will close or open, depending on whether it is set to normally closed (N.C.) or normally open (N.O.). The 6-pin power connector allows you to connect an over-molded cable (supplied) from the EPS5000-120 to either the RK5000-3U or the RK5000PS-3U. The power fail LED turns red when there is a problem with the power supply that can cause it to fail. If one of the power supplies fails, the blue Pelco badge will turn off.

Manufacturer, product group, and supply

See who makes this product, where it belongs, and where available inventory may be listed.

Manufactured by Pelco View Pelco profile
Product group Modules Explore Modules
Available from 1 marketplace offer Compare sellers and inventory


Where to buy


Total 1 item.
Green Eagle Logistics RK5000PS-3U
Verified marketplace seller
40 items available

4 New - Original Factory Packaging:

35 Certified Pre-Owned: $99999.00

1 Certified Pre-Owned: