Teknor Applicom T933*AB*A_2A overview
Kontron Teknor PCI-933 PICMG CPU Board with Intel Pentium up to 166MHz processor.The high performance TEK933 (also called the PCI-933) PentiumTM PCI-ISA Single ...
Product details
Manufactured byTeknor Applicom
Product groupModules
DescriptionKontron Teknor PCI-933 PICMG CPU Board with Intel Pentium up to 166MHz processor.The high performance TEK933 (also called the PCI-933) PentiumTM PCI-ISA Single Board Computer has the special characteristics of supporting Intel’s Pentium microprocessor, as well as both the PCI bus and the ISA bus.
Key FeaturesThe TEK933 fully complies with the PCI INDUSTRIAL COMPUTER MANUFACTURERS GROUP (PICMG), Revision 2.0 specification. As a result, the TEK933 is fully IBM AT compatible, as well as complying with the PCI Local Bus Specification, Revision 2.1. This board may be installed in the TEK950 PCI-ISA Passive Backplane, which has three PCI slots, five ISA slots and one dedicated PCI-ISA CPU slot (for more information, see the TEK950 TECHNICAL REFERENCE MANUAL). The TEK933 has an interchangeable microprocessor design, with the following PentiumTM microprocessors available: 75, 100, 120, 133, 150 and 166 MHz. Each microprocessor has separate Code and Data Caches: 8KB Code, and 8KB Write Back Data. The TEK933 standard configuration also has 256KB of direct-mapped, write-back / write-through External Cache Memory (optional: none). System memory can be configured from 2MB to 128MB (256MB when available) of Dynamic RAM (DRAM) with 32-bit or 36-bit modules installed on the board's four vertical, 72-pin SIMM sockets. The board is ideal for industrial applications with features like: - Watchdog timer; - SMM (System Management Mode) support and full SMI (System Management Interrupt) interface for power management; - Power failure detector; - Low battery detector; - Shadow RAM BIOS support for fast execution; - Flash EPROM boot; - Real-Time Clock (RTC) with battery backup. The TEK933 has a multi-function connector which provides all the necessary signals for connecting the keyboard, speaker, reset, and keylock interface devices. The local bus SVGA video controller is from Cirrus Logic‚ and provides high resolution Flat Panel and CRT displays. The board also comes with 1MB of video memory (DRAM) and a Feature Connector for video overlay and color keying. A PS/2 mouse port is included. The board includes two enhanced onboard IDE interfaces, which support PIO (Programmed Input/Output) mode-4 and mode-5 transfer rates. The TEK933 includes an enhanced super Floppy controller which supports two Floppy disk drives of up to 2.88MB each, 16 bytes of FIFO buffering and a 48mA drive buffer. The TEK933 board has one parallel printer port (the hardware supports ECP and EPP modes). Two 16550 compatible serial ports with internal 16-byte FIFO buffers can be defined as two of the following: COM1, COM2, COM3 or COM4. Serial Port 2 is available as RS232 or RS485/RS422. Serial Port 1 is only available as RS232. The onboard Ethernet port, compliant with IEEE 802.3/ANSI 8802-3, can function with either the 10 Base-T or 10 Base-2 interface. The Ethernet Controller supports the Plug and Play standard. It has a serial EEPROM onboard for Plug and Play compatibility and configuration storage. An optional onboard SCSI controller supports up to seven SCSI peripherals and Fast SCSI II.
Manufacturer, product group, and supply
See who makes this product, where it belongs, and where available inventory may be listed.
Product group
Modules
Explore Modules
Available from
1 marketplace offer
Compare sellers and inventory
Where to buy
Total 1 item.
Green Eagle Logistics
TEK933
Verified marketplace seller
16 items available
12 Certified Pre-Owned: $99999.00
1 Certified Pre-Owned: