Honeywell FCPS-24S8 overview
Honeywell FCPS-24S8 Remote Power Supply The FCPS-24S6 Series (6-amp) and FCPS-24S8 Series (8-amp) are remote power supplies with a battery charger. The FCPS-24S6/-24S8 may be connected to any 12- or 24-volt fire alarm control panel (FACP) or used as a stand-alone supply. Primary applications include...
What is Honeywell FCPS-24S8?
Honeywell FCPS-24S8 Remote Power Supply The FCPS-24S6 Series (6-amp) and FCPS-24S8 Series (8-amp) are remote power supplies with a battery charger. The FCPS-24S6/-24S8 may be connected to any 12- or 24-volt fire alarm control panel (FACP) or used as a stand-alone supply. Primary applications include...
Product details
Manufactured byHoneywell
Product groupRemote Power Supply
DescriptionHoneywell FCPS-24S8 Remote Power Supply
OverviewThe FCPS-24S6 Series (6-amp) and FCPS-24S8 Series (8-amp) are remote power supplies with a battery charger. The FCPS-24S6/-24S8 may be connected to any 12- or 24-volt fire alarm control panel (FACP) or used as a stand-alone supply. Primary applications include notification appliance circuit (NAC) expansion (to support ADA requirements and NAC synchronization) or auxiliary power for 24-volt system accessories. The FCPS-24S6/-24S8 provides regulated and filtered 24 VDC power to four notification appliance circuits, configured as either four Class B (Style Y) or four Class A (Style Z, with ZNAC-4 option module). Alternatively, the four outputs may be configured as all non-resettable, all resettable, or two non-resettable and two resettable. The FCPS-24S6/-24S8 also contains a battery charger capable of charging up to 18 AH batteries. The FCPS-24S6C and FCPS-24S8C are ULC-listed.
Key FeaturesUL-Listed NAC synchronization using System Sensor®, Whee- lock®, or Gentex® “Commander2” appliances Operates as a “sync-follower” or as a “sync-generator” (default) Contains two fully-isolated input/control circuits - triggered from FACP NAC (NAC expander mode) or jumped permanently “ON” (stand-alone mode) Four Class B (Style Y) or four Class A (Style Z, with ZNAC-4 module) NACs 6-amp (FCPS-24S6) or 8-amp (FCPS-24S8) full load output, with 3 amps maximum/circuit, in NAC expander mode (UL 864) 4-amp (FCPS-24S6) or 6-amp (FCPS-24S8) continuous output in stand-alone mode (UL 1481) Compatible with coded inputs; signals passed through Optional power-supervision relay (EOLR-1) In stand-alone mode, output power circuits may be configured as: resettable, (reset line from FACP required), non-resettable, or a mix of two and two Fully regulated and filtered power output - optimal for powering four-wire smoke detectors, annunciators, and other system peripherals requiring regulated/filtered power Power-limiting technology meets UL power-limiting requirements Form-C normally-closed trouble relay Fully supervised power supply, battery, and NACs Selectable earth fault detection AC trouble report selectable for immediate 2-hour delay Works with virtually any UL 864 fire alarm control which utilizes an industry-standard reverse-polarity notification circuit (including unfiltered and unregulated NAC power) Requires input trigger voltage of 9 - 32 VDC Self-contained in compact, locking cabinet - 15”H x 14.5”W x 2.75”D (cm: 38.1H x 36.83W x 6.985D) Includes integral battery charger capable of charging up to 18 AH batteries. Cabinet capable of housing 7.0 AH batteries Battery charger may be disabled via DIP switch for applications requiring larger batteries Fixed, clamp-type terminal blocks accommodate up to 12 AWG (3.1mm2) wire
Manufacturer, product group, and supply
See who makes this product, where it belongs, and where available inventory may be listed.
Manufactured by
Honeywell
View Honeywell profile
Product group
Remote Power Supply
Explore Remote Power Supply
Available from
1 marketplace offer
Compare sellers and inventory
Where to buy
Total 1 item.
Green Eagle Logistics
FCPS-24S8
Verified marketplace seller
4 items available
12 Certified Pre-Owned : $99999.00