Warrick Controls Series 1C overview
Warrick Controls Series 1C Control Relays | Electromechanical Controls | Conductivity-Based Liquid Level Controls | with 2 (N.O.), 0 (N.C.) Contact Configuratio...
Manufactured byWarrick Controls
Part number or familySeries 1C
Product groupConductivity-Based Liquid Level Controls
Product details
Manufactured byWarrick Controls
Product groupConductivity-Based Liquid Level Controls
DescriptionWarrick Controls Series 1C Control Relays | Electromechanical Controls | Conductivity-Based Liquid Level Controls | with 2 (N.O.), 0 (N.C.) Contact Configurations.
SpecificationsContact Design: 2 or 3 pole, single throw, electromechanical relayContact Rating (110 VAC): 16 amp Resistive 1 hpMode of Operation: Direct onlySensitivity: 0 - 20K ohm maximum, factory setPrimary Voltage: 24 VAC, 115 VAC, 230 VAC, 460 VAC, 575 VAC (+10%/-15%)Power Consumption: 4 watts (15 VA)Secondary Voltage: 25 VAC, 75 VAC, 150 VAC, 300 VAC, 500 VAC*Temperature: -30°F to 130°FApprovals: U.L. Rec., FM, CSA, U.L. Listed Limit Control, U.L. 353Connections: All screw type connections* Due to high secondary voltage, if personnel can come in contact with electrodes, we suggest using Series 16, 26 or 19 controls.
Typical ApplicationsGeneral PurposeBoiler Level ControlOn/Off ControlBoiler LLCOPump Control
Key Features2 or 3 Pole Output ContactUp to 20K Ohms/cm SensitivityU.L. “Limit Control”U.L. “Motor Control”
OverviewOne of Warrick’s first products, Series 1 electromechanical controls offer 2 or 3 pole output contacts with 16 amp rating. These versatile controls can be configured for single level service, differential control, low water cutoff (with manual reset or lock out capability) control and many other functions
Manufacturer, product group, and supply
See who makes this product, where it belongs, and where available inventory may be listed.
Product group
Conductivity-Based Liquid Level Controls
Explore Conductivity-Based Liquid Level Controls
Available from
Sourcing support available
Start a sourcing request