Texas Instruments PCA9555 overview
TI PCA9555 Specialized Hot IC, PCA9555 TI Philips PCA9555 16-bit I2C-bus and SMBus I/O port 2.3~5.5V • Operating power supply voltage range of 2.3 V to 5.5 V• 5 V tolerant I/Os• Polarity Inversion register• Active LOW interrupt output• Low standby current• Noise filter on SCL/SDA inputs�...
What is Texas Instruments PCA9555?
TI PCA9555 Specialized Hot IC, PCA9555 TI Philips PCA9555 16-bit I2C-bus and SMBus I/O port 2.3~5.5V • Operating power supply voltage range of 2.3 V to 5.5 V• 5 V tolerant I/Os• Polarity Inversion register• Active LOW interrupt output• Low standby current• Noise filter on SCL/SDA inputs�...
Product details
Manufactured byTexas Instruments
Product groupModules
DescriptionTI PCA9555 Specialized Hot IC, PCA9555 TI
Description 1785248694Philips PCA9555 16-bit I2C-bus and SMBus I/O port 2.3~5.5V
Key Features & Benefits• Operating power supply voltage range of 2.3 V to 5.5 V• 5 V tolerant I/Os• Polarity Inversion register• Active LOW interrupt output• Low standby current• Noise filter on SCL/SDA inputs• No glitch on power-up• Internal power-on reset• 16 I/O pins which default to 16 inputs• 0 Hz to 400 kHz clock frequency• ESD protection exceeds 2000 V HBM per JESD22-A114, 200 V MM per JESD22-A115, and 1000 V CDM per JESD22-C101• Latch-up testing is done to JEDEC Standard JESD78 which exceeds 100 mA• Five packages offered: SO24, SSOP24, TSSOP24, HVQFN24 and HWQFN24
Applications• Servers• Routers (Telecom Switching Equipment)• Personal Computers• Personal Electronics• Industrial Automation Equipment• Products with GPIO-Limited Processors
OverviewThe PCA9555 is a 24-pin CMOS device that provides 16 bits of General Purpose parallel Input/Output (GPIO) expansion for I2C-bus/SMBus applications and was developed to enhance the NXP Semiconductors family of I2C-bus I/O expanders. The improvements include higher drive capability, 5 V I/O tolerance, lower supply current, individual I/O configuration, and smaller packaging. I/O expanders provide a simple solution when additional I/O is needed for ACPI power switches, sensors, pushbuttons, LEDs, fans, etc.The PCA9555 consists of two 8-bit Configuration (Input or Output selection); Input, Output, and Polarity Inversion (active HIGH or active LOW operation) registers. The system master can enable the I/Os as either inputs or outputs by writing to the I/O configuration bits. The data for each Input or Output is kept in the corresponding Input or Output register. The polarity of the read register can be inverted with the Polarity Inversion register. All registers can be read by the system master. Although pin-to-pin and I2C-bus addresses are compatible with the PCF8575, software changes are required due to the enhancement, and are discussed in Application Note AN469.The PCA9555 open-drain interrupt output is activated when any input state differs from its corresponding input port register state and is used to indicate to the system master that an input state has changed. The power-on reset sets the registers to their default values and initializes the device state machine.Three hardware pins (A0, A1, A2) vary the fixed I2C-bus address and allow up to eight devices to share the same I2C-bus/SMBus. The fixed I2C-bus address of the PCA9555 is the same as the PCA9554, allowing up to eight of these devices in any combination to share the same I2C-bus/SMBus.
Manufacturer, product group, and supply
See who makes this product, where it belongs, and where available inventory may be listed.
Manufactured by
Texas Instruments
View Texas Instruments profile View Philips profile View NXP Semiconductor profile
Available from
Sourcing support available
Start a sourcing request