Kontron PCIDCC20-P overview
ICS Advent PCIDCC20-P 20 Counter/Timer Card, manual, softwareKey Features 5 Independent 16-Bit Counters Cascadable Counters Measures Frequency to 7Mhz Up/Down a...
Product details
Manufactured byKontron
Product groupCounter/Timer Cards
DescriptionICS Advent PCIDCC20-P 20 Counter/Timer Card, manual, softwareKey Features 5 Independent 16-Bit Counters Cascadable Counters Measures Frequency to 7Mhz Up/Down and Binary/BCD Counting Programmed Frequency Output Alarm Comparators on Two Counters Supported by Major Application Software Packages 10 or 20 Independent 16-Bit Counters Binary/BCD - Up/Down Programmable Count Source/Gate Selection Programmable Input/Output Polarities Interrupt Handling 1 MHz TTL Oscillator Counters Internally CascadableThe PCIDCC5/10/20-P family consists of three models, the PCIDCC5-P, PCIDCC10-P, and the PCIDCC20-P. The PCIDCC20-P contains four AM9513 System Timing Controller LSI circuits. Each AM9513 consists of five independent 16-bit up/down counters. The PCIDCC10-P contains two AM9513 circuits and the PCIDCC5-P contains one. The PCIDCC5-P does however, contain an 8-bit input port and an 8-bit output port in addition to the AM9513. The PCIDCC10-P and PCIDCC20-P are physically the same board except for the difference in the number of counters. On the PCIDCC10-P and PCIDCC20-P, the signals for each counter are available on independent 26-pin headers. On the PCIDCC5-P, the signals are available on a DB37 male connector. The counters can be programmed to count up or down in either binary or BCD. A selection of various internal and external frequency sources and outputs may be chosen as inputs for individual counters with software selectable active-high or active-low polarities. Each counter may be gated by either software or hardware. Each counter has a single dedicated output pin. Considerable versatility for configuring both the input and the gating of individual counters is provided. This not only permits dynamic re-assignment of inputs under software control, but also allows multiple counters to use a single input, allows a single gate input to control more than one counter, and allows for cascading. The PCIDCC5/10/20-P series of adapters is fully PCI 2.1 compliant and thus "Plug-and-Play". The Interupt Request (IRQ) and Base Address of the adapter is defined by the PCI BIOS. This scheme typically prevents I/O and IRQ conflicts.
Manufacturer, product group, and supply
See who makes this product, where it belongs, and where available inventory may be listed.
Manufactured by
Kontron
View Kontron profile
Product group
Counter/Timer Cards
Explore Counter/Timer Cards
Available from
Sourcing support available
Start a sourcing request
| # | Name |
|---|---|
| 1 | PCIDCC20-P |