StockCheck - Aggregating Everything
✓Product overview Kimmon Quartz

NDR-6W

Kimmon Quartz · Flow Totalizers

Kimmon Quartz NDR-6W

Images are for reference only. The actual item may differ in appearance, labeling, revision, firmware or condition. Please verify the part number and specifications before ordering.

Kimmon Quartz NDR-6W overview

NDR-6W is a flow totalizer made by Kimmon Quartz. Kimmon Quartz NDR-6W Meter - Flow Totalizer (Drip Meter) The central heating system lately popularized for home heating depend mostly on the method to supply hot water through a boiler using kerosene as a fuel. In an apartment house, the fuel oil is pumped up from…

Manufactured byKimmon Quartz
Part number or familyNDR-6W
Product typeFlow Totalizer

Product details

Manufactured byKimmon Quartz
Product typeFlow Totalizer
DescriptionKimmon Quartz NDR-6W Meter - Flow Totalizer (Drip Meter)
OverviewThe central heating system lately popularized for home heating depend mostly on the method to supply hot water through a boiler using kerosene as a fuel. In an apartment house, the fuel oil is pumped up from underground tank to roof tank and then fed to a service tank of each home by natural down stream force. The fuel oil in the service tank is to be fed afterward to the burner of a boiler with head difference of around 2 meters (6-feet). The capacity of the service tank is less than 30 liters and the flow rate is so small as 0.5 to 10 liter/h. In order to measure the fuel consumption of each home, accordingly, there is no other way to measure the practical feeding quantity of fuel by means of oil meter between the service tank and the hot-water boiler. Flow meter NDR-6W (so called the drip meter) is developed for the purpose of measuring such small flow of fuel oil and is characterized by Japan's first oil measuring meter. This meter can be applied to a wide variety of fluids required very small amount measured such as water analysis for nuclear reactors, greenhouse heating systems, small size boilers and diesel engines, and etc.
Key FeaturesHead Loss is very low: Conventional piston type and single-valve type flow meters have suffered fromhigh head loss (for instance, over 200 mmAq at a rate of 20 l/h in case of kerosene) which often caused the interruption of fuel feeding because of air collected in the piping could not be sufficiently exhausted. the head loss of this flow meter (NDR-6W), meanwhile, is so small as only 25 mmAq at the rate 20 l/h in the same case. This characteristic performance raises to a maximumthe exhaust effect and reduces to a minimumthe interruption of fuel feeding. Dust does not effect: In the piston type flow meters, dust tends to impede the motion of piston being collected in the gap scarcely left between the piston and the cylinder and besides at a piston ring in use, so that strainer is indispensable to check the entrance of dust. The NDR-6W and separate inner-mechanism, however, no strainer is generally required because the dust is to settle down outside the diaphragmsections so as not to affect the measuring mechanism. Water does not affect (in case of fuel measuring): In the piston type flow meters, the water may rust the piston or freeze in winter, but the NDR-6W separate inner-mechanismthe water never affects the measuring mechanismeven if it is frozen because it is collected outside the diaphragmsections and later it is discharged through the drain hole. If it should happen the meter filled with water by mistake, the meter must be dismantled fromthe line and turned upside down so the water will be drained fromall parts of the meter.

Manufacturer, product group, and supply

See who makes this product, where it belongs, and where available inventory may be listed.

Manufactured by Kimmon Quartz View Kimmon Quartz profile
Available from Sourcing support available Start a sourcing request