Johnson Controls M9216 Series overview
Johnson Controls M9216 Series Electric Spring Return Actuators Available Torques: 140 and 280 lb·in (16 and 32 N·m)- Offer selection most suitable for the app...
Product details
Manufactured byJohnson Controls
Product groupActuator
DescriptionJohnson Controls M9216 Series Electric Spring Return Actuators
Key FeaturesAvailable Torques: 140 and 280 lb·in (16 and 32 N·m)- Offer selection most suitable for the application Bidirectional, Return-to-Normal Spring Return- Allows selectable rotation/spring return direction simplifying installation Extended Temperature Range- Meets the needs of most outdoor air applications Output Position Feedback- Provides simple, closed-loop control with accurate position sensing Electronic Stall Detection- Ensures higher reliability by deactivating the actuator motor when a stall condition is detected Auto Stroke Calibration (GGx Models)- Reduces field installation time and cost due to self adjustment Zero and Span Adjustment (HGx Models)- Allows sequential operation of dampers from a single input signal of 0 (2) to 10 VDC or 0 (4) to 20 mA Manual Override- Allows manual positioning when the actuator is not powered; simplifies setup and field adjustments NPT Conduit Adaptor (Included)-Provides easy connection for electrical fittings and armored cable
OverviewThe M9216 Series direct-mount, spring return electric actuators operate on 24 VAC or VDC power and are available for use with on/off, floating, proportional, or resistive controllers. These bidirectional actuators do not require a damper linkage, and are easily installed on a damper with a round shaft up to 3/4 in. (19 mm) in diameter or a square shaft up to 5/8 in. (16 mm). M9216 actuators may be direct or remote mounted to a damper, or mounted to a valve using one of the M9000-5xx Valve Linkage Kits.A single M9216 model delivers up to 140 lb·in (16 N·m) of torque. Two BGx, GGx, or HGx models in tandem eliver twice the torque or 280 lb·in (32 N·m). The angle of rotation is mechanically adjustable from 30 to 90°. Integral auxiliary switches are available to indicate end-stop position or to perform switching functions at any angle within the selected rotation range. Position feedback is available through switches, a potentiometer, or a 0 (2) to 10 VDC signal.
Manufacturer, product group, and supply
See who makes this product, where it belongs, and where available inventory may be listed.
Manufactured by
Johnson Controls
View Johnson Controls profile
Available from
Sourcing support available
Start a sourcing request