Product details
Manufactured bySIXNet
Product groupModules
DescriptionSixNet EtherTRAK ET-16DO2-H High Density Discrete Output ModuleSixteen discrete output channels each provide up to 1 Amp DC to motor contactors, valves, and other loads. Inductive surge protection is provided. Each of the sixteen outputs may optionally be configured as Time Proportioned Outputs that pulse ON at a duty cycle proportional to an analog output register value. Typically these TPO outputs are controlled by a PID loop or other process algorithm in a control program. More information can be found in the on-line help supplied with the SIXNET I/O Tool Kit program.Number of Channels: 16 discrete outputs connected to a common DC sourceOutput Voltage Range: 10 - 30 VDCMax. Load per Output: 1 AmpMax. Load per Module: 8 AmpsMax. Inrush Current: 5 Amps (for 100 mS)Wiring A single terminal is provided for each output channel. All outputs are powered from the DC power terminal. All channels are referenced to a common return, which is connected to the negative side (ground) of the DC power source.TPO Feature Time proportioned outputs pulse ON and OFF with a duty cycle proportional to an analog value stored in an analog output register. TPO outputs are a low cost way to get smooth proportional control of heaters and other process variables. Typically, TPO analog output registers are assigned to the output of PID or other control logic in an ISaGRAF or other program. Use the SIXNET I/O Tool Kit to set pulse cycling as fast as 10 mS or as slow (many minutes) as your system dynamics require. Each output may be configured as a TPO or ordinary discrete output.
Manufacturer, product group, and supply
See who makes this product, where it belongs, and where available inventory may be listed.
Manufactured by
SIXNet
View SIXNet profile
Product group
Modules
Explore Modules
Available from
Sourcing support available
Start a sourcing request