StockCheck - Aggregating Everything
✓Product overview General Electric

RR Series

General Electric

General Electric RR Series

Images are for reference only. The actual item may differ in appearance, labeling, revision, firmware or condition. Please verify the part number and specifications before ordering.

General Electric RR Series

General Electric RR Series overview

RR Series is made by General Electric. General Electric RR Series Relays General Electric (GE) RR Series Relays has served as the heart of low voltage lighting controls for over 40 years. The basic power switching device, the relay serves as the foundation of a building’s lighting control solution.GE’s Remote Control…

Manufactured byGeneral Electric
Part number or familyRR Series
Product typeProduct type not listed yet

Product details

Manufactured byGeneral Electric
DescriptionGeneral Electric RR Series Relays
OverviewGeneral Electric (GE) RR Series Relays has served as the heart of low voltage lighting controls for over 40 years. The basic power switching device, the relay serves as the foundation of a building’s lighting control solution.GE’s Remote Control panels and frames are configured for either RR7P or RR9P relays with a five-pin female connector. The user can simply remove a knockout in the low voltage barrier, snap the relay into place, and plug it onto the interconnect board.
RR7P OperationEach relay employs a split low-voltage (24V) coil to move the line voltage contact armature to the ON(OFF) latched position. As illustrated on the opposite page for the RR7P, the ON coil moves the armature to the left when a 24-volt control signal is impressed across its leads. The armature latches in the ON position and will remain there until the OFF coil is energized. This operation provides several key control features: Positive action. The relay always goes to the state commanded. For example, multiple OFF commands will keep the contacts in the OFF position. Stable operation. Since the relay latches in the ON or OFF position, power outages do not result in a change of state. Minimal power consumption. Control power is only required when the relay changes state. Ability to support multiple input devices. After the relay responds to a momentary pulse, it is then "free" to accept another pulse from any other control devices wired to it. The relay position is always controlled by the last signal.
RR9P OperationThe RR9P includes an auxiliary contact on the low-voltage side of the armature to provide a status indication for pilot light switches or indicator lights for remote annunciation of lighting status. It is also used to provide status information to more highly automated GE TLC systems (refer to page 3 for overviews of other systems)

Manufacturer, product group, and supply

See who makes this product, where it belongs, and where available inventory may be listed.

Manufactured by General Electric View General Electric profile
Product type Product type not listed yet
Available from Sourcing support available Start a sourcing request