Emerson FTA1100-EL12N overview
Emerson Firetrol FTA1100-EL12N Diesel Engine Fire Pump Controller. High Zone Controller.Firetrol® combined automatic and manual Mark IIXG based diesel engine f...
Manufactured byEmerson
Part number or familyFTA1100-EL12N
Product groupDiesel Engine Fire Pump Controllers
Product details
Manufactured byEmerson
Product groupDiesel Engine Fire Pump Controllers
DescriptionEmerson Firetrol FTA1100-EL12N Diesel Engine Fire Pump Controller. High Zone Controller.Firetrol® combined automatic and manual Mark IIXG based diesel engine fire pump controllers are intended for starting and monitoring fi re pump diesel engines. They are suitable for use with both mechanical and electronic type engines. The controller is available for 12 or 24 volt negative ground systems, using lead acid or Nickel-Cadmium batteries. The controller monitors, displays and records fi re pump system information.
ApprovalsFiretrol fire pump controllers are listed by Underwriters’ Laboratories, Inc., in accordance with UL218, Standard for Fire Pump Controllers, CSA, Standard for Industrial Control Equipment (cUL), and approved by Factory Mutual. They are built to meet or exceed the requirements of the approving authorities as well as NEMA and the latest editions of NFPA 20, Installation of Centrifugal Fire Pumps, and NFPA 70, National Electrical Code.
Standard FeaturesAC Line & Battery circuit breakersManual-Off-Auto selector switchManual test push-buttonTwo manual crank push-buttonsTwo 10 Amp battery chargers with 4 stage charging cycle, selectable AC voltage (110 / 220), selectable DC voltage (12 / 24), and selectable battery type (Lead Acid, Ni-Cad 9/18 Cell, Ni-Cad 10/20 Cell)Door mounted display/interface panel featuring a 128 x 64 pixel backlit LCD graphical display, Membrane Type User Control Push-buttons with LED Indicators- AC POWER AVAILABLE- ALARM- MAIN SWITCH IN AUTO- MAIN SWITCH IN MANUAL- SYSTEM PRESSURE LOW- ENGINE RUNNING- ENGINE FAIL TO START- ENGINE TEMPERATURE HIGH- ENGINE OIL PRESSURE LOW- ENGINE OVERSPEED- ENGINE ALTERNATE ECM- ENGINE FUEL INJECTOR MALFUNCTION- FUEL LEVEL LOW- AUTOMATIC SHUTDOWN DISABLED- CHARGER MALFUNCTION- BATTERY #1 TROUBLE- BATTERY #2 TROUBLEMinimum Run Timer / Off Delay TimerProgrammable Daylight Saving Time OptionWeekly Test TimerEngine Run Time MeterDigital Pressure DisplayUSB Host Controller and PortSolid State Pressure TransducerData LogEvent Log (3000 events)Simultaneous Display of Battery Voltages, Charging Rates, AC Volts, Pressure and Alarm MessagesDisk Error MessageDisk Near Full MessagePressure Error MessageFail to Start MessageLow Suction Pressure MessageCrank Cycle Status Indication (Displays Cranking Battery, Number of Starting Attempts and Crank/Rest Time Remaining)300 psi (20.7 bars) wet parts (solid state pressure transducer, solenoid valve, plumbing) for fresh water applicationsNEMA Type 2 enclosure (IEC IP22)Each standard controller comes with user set options for:- AC Power Loss Start- Interlock Alarm- Low Pressure Aud.- Low Suction- Main Sw. Mis-Set- Manual Test- Pump Run Alarm- Remote Start- User Defi ned Input- Weekly Test Setup- Low Pump Rm Temp- Low Reservoir- Relief Valve Open- High Fuel Level- High Reservoir
Manufacturer, product group, and supply
See who makes this product, where it belongs, and where available inventory may be listed.
Product group
Diesel Engine Fire Pump Controllers
Explore Diesel Engine Fire Pump Controllers
Available from
Sourcing support available
Start a sourcing request