StockCheck - Aggregating Everything
✓Product overview Electro-Metrics

PCL-30

Electro-Metrics · RFI / EMI / EMC

Electro-Metrics PCL-30

Electro-Metrics PCL-30 overview

PCL-30 by Electro-Metrics is listed under RFI / EMI / EMC. Electro-Metrics PCL-30 RFI / EMI / EMC, Current Probe | 10 kHz – 110 MHz The PCL-30 Current Probe enables a conventional voltmeter, oscilloscope, calibrated receiver (e.g., an interference analyzer), or other electronic instrumentation to rapidly measure…

Manufactured byElectro-Metrics
Part number or familyPCL-30
Product typeRFI / EMI / EMC

Product details

Manufactured byElectro-Metrics
Product typeRFI / EMI / EMC
DescriptionElectro-Metrics PCL-30 RFI / EMI / EMC, Current Probe | 10 kHz – 110 MHz
OverviewThe PCL-30 Current Probe enables a conventional voltmeter, oscilloscope, calibrated receiver (e.g., an interference analyzer), or other electronic instrumentation to rapidly measure current accurately from 9 kHz to 110 MHz. The measurement of conducted current is performed without a direct connection to the circuit under test, with the probe clamped around the conductor, current carrying wire, or structural member being tested.The PCL-30 Current Probe consists of two hinged semicircles capable of placement around conductors with diameters up to and including 25.4 mm (one-inch). The output of the probe is connected to the input of the detection system through a 50-ohm cable (CAC-30). The response of the probe is proportional both to signal frequency and conducted signal current.

Manufacturer, product group, and supply

See who makes this product, where it belongs, and where available inventory may be listed.

Manufactured by Electro-Metrics View Electro-Metrics profile
Product type RFI / EMI / EMC Explore RFI / EMI / EMC
Available from Sourcing support available Start a sourcing request