Images are for reference only. The actual item may differ in appearance, labeling, revision, firmware or condition. Please verify the part number and specifications before ordering.
Eaton Rotorseal overview
Rotorseal is a seal made by Eaton. Airflex Eaton 145107BG Rotorseal - Type C2 Standard Model: 3000 Max. RPM and 150 Max. Pressure PSI. The Airflex rotorseal is a rotary union (rotary joint) which permits the transfer of gases or liquids, under pressure or vacuum, into or out of the exposed end of a rotating shaft or…
Specifications
| Standard model | 3000 Max. RPM and 150 Max. Pressure PSI. |
|---|
Product details
Manufactured byEaton
Product typeSeal
DescriptionAirflex Eaton 145107BG Rotorseal - Type C2 Standard Model: 3000 Max. RPM and 150 Max. Pressure PSI.
OverviewThe Airflex rotorseal is a rotary union (rotary joint) which permits the transfer of gases or liquids, under pressure or vacuum, into or out of the exposed end of a rotating shaft or body. It was designed primarily for the passage of compressed air or hydraulic fluid to control clutches or brakes. Other applications include the transmittal of cutting fluid to machine tools, lubrication of shaft-mounted components and circulation of water or oil for cooling systems.The rotating seal is established by a non-metallic sealing ring, held against the rotorseal shaft by a light spring force. The sealing ring is designed so that media pressure acts on both of its ends to minimize the force on the sealing surface.This design gives positive protection against leakage and compensates for seal wear. Ball bearings are used between the stationary and rotating ports to provide rigidity to the rotorseal assembly and to minimize the running torque.Rotorseals are available with single, dual and triple passages, in a variety of sizes and designs, to provide the versatility needed to handle most requirements. Single passage rotorseals, in pneumatic installation, can be plumbed with a quick release valve at its inlet port to provide a convenient exhaust.In most applications, the rotorseal is mounted to the end of a shaft. The shaft is rifle and cross drilled to provide a passageway for the media transmitted. It is important that the rotorseal’s axis of rotation be concentric with the rotating member’s axis of rotation to minimize rotorseal wobble.
Manufacturer, product group, and supply
See who makes this product, where it belongs, and where available inventory may be listed.
Available from
Sourcing support available
Start a sourcing request

