Cooper Power Systems 6A00160104 overview
6A00160104 is a Microprocessor-Based Pole-Mount recloser control made by Cooper Power Systems. Cooper Power Systems 6A00160104 Form 6 Series Pole-Mount Recloser Control | 12 Vdc – 48 Vdc, 5 mA Nominal Current, 5 milliseconds Minimum Operating Time. The Form 6 pole-mount microprocessor-based recloser control includes…
Manufactured byCooper Power Systems
Part number or family6A00160104
Product typeMicroprocessor-Based Pole-Mount Recloser Control
Product details
Manufactured byCooper Power Systems
Product typeMicroprocessor-Based Pole-Mount Recloser Control
DescriptionCooper Power Systems 6A00160104 Form 6 Series Pole-Mount Recloser Control | 12 Vdc – 48 Vdc, 5 mA Nominal Current, 5 milliseconds Minimum Operating Time.
OverviewThe Form 6 pole-mount microprocessor-based recloser control includes extensive system protection functionality, including phase, ground, and negative sequence overcurrent protection, over/underfrequency, and voltage protection, directionality, sensitive ground fault, and sync check.Analysis tools include fault locating, event recording, TCC Editor II, Idea Workbench, Data Profiler, and oscillography functions, including oscillography replay.Metering functions include demand and instantaneous current on a per-phase basis, instantaneous voltage and power factor on a per-phase basis, and power (real, reactive, apparent) on a per phase or total basis. Symmetrical components for both voltage and current are displayed along with kilowatt-hours for energy metering. Harmonics from the 2nd to the 15th harmonic are also included.The front panel LCD display is used to configure the operating settings for the control. It is also used to display metering, counter information, control parameters, reset alarms, and provide diagnostic information.Control parameters can also be programmed via a personal computer connected to the control through the front panel RS-232 port. Control programming, interrogation, and operations are performed with Form 6 ProView interface software on a personal computer.ProView interface program software includes additional functions used to create and graphically display Time Current Curves and provides the Idea Workbench for configuring user-selected inputs and outputs, configurable event and alarm data, and selectable communication points for serial communication.The control operates on 50 and 60 Hz systems.
Manufacturer, product group, and supply
See who makes this product, where it belongs, and where available inventory may be listed.
Product type
Microprocessor-Based Pole-Mount Recloser Control
Explore Microprocessor-Based Pole-Mount Recloser Control
Available from
Sourcing support available
Start a sourcing request