CMD Technology SBA-005440-001 overview
CMD Technology SBA-005440-001 SCSI Controller Board UL-Listed NAC synchronization using System Sensor®, Whee- lock®, or Gentex® “Commander2” appliances O...
Manufactured byCMD Technology
Part number or familySBA-005440-001
Product groupSCSI Controller Board
Product details
Manufactured byCMD Technology
Product groupSCSI Controller Board
DescriptionCMD Technology SBA-005440-001 SCSI Controller Board
Key FeaturesUL-Listed NAC synchronization using System Sensor®, Whee- lock®, or Gentex® “Commander2” appliances Operates as a “sync-follower” or as a “sync-generator” (default) Contains two fully-isolated input/control circuits - triggered from FACP NAC (NAC expander mode) or jumped permanently “ON” (stand-alone mode) Four Class B (Style Y) or four Class A (Style Z, with ZNAC-4 module) NACs 6-amp (FCPS-24S6) or 8-amp (FCPS-24S8) full load output, with 3 amps maximum/circuit, in NAC expander mode (UL 864) 4-amp (FCPS-24S6) or 6-amp (FCPS-24S8) continuous output in stand-alone mode (UL 1481) Compatible with coded inputs; signals passed through Optional power-supervision relay (EOLR-1) In stand-alone mode, output power circuits may be configured as: resettable, (reset line from FACP required), non-resettable, or a mix of two and two Fully regulated and filtered power output - optimal for powering four-wire smoke detectors, annunciators, and other system peripherals requiring regulated/filtered power Power-limiting technology meets UL power-limiting requirements Form-C normally-closed trouble relay Fully supervised power supply, battery, and NACs Selectable earth fault detection AC trouble report selectable for immediate 2-hour delay Works with virtually any UL 864 fire alarm control which utilizes an industry-standard reverse-polarity notification circuit (including unfiltered and unregulated NAC power) Requires input trigger voltage of 9 - 32 VDC Self-contained in compact, locking cabinet - 15”H x 14.5”W x 2.75”D (cm: 38.1H x 36.83W x 6.985D) Includes integral battery charger capable of charging up to 18 AH batteries. Cabinet capable of housing 7.0 AH batteries Battery charger may be disabled via DIP switch for applications requiring larger batteries Fixed, clamp-type terminal blocks accommodate up to 12 AWG (3.1mm2) wire
Manufacturer, product group, and supply
See who makes this product, where it belongs, and where available inventory may be listed.
Manufactured by
CMD Technology
View CMD Technology profile
Product group
SCSI Controller Board
Explore SCSI Controller Board
Available from
Sourcing support available
Start a sourcing request