StockCheck - Aggregating Everything®
✓Product overview Ametek

575 Series

Ametek · Submersible Level Transmitters

Ametek 575 Series

Images are for reference only. The actual item may differ in appearance, labeling, revision, firmware or condition. Please verify the part number and specifications before ordering.

Ametek 575 Series overview

575 Series is a submersible level transmitter made by Ametek. Ametek 575 Series Submersible Level Transmitters | Electronic Measurement Products.The Model 575 is used in general water/wastewater applications. The transmitter is offered in a standard non-clogging snub nose end, flush diaphragm or protected flush…

Manufactured byAmetek
Part number or family575 Series
Product typeSubmersible Level Transmitter

Specifications

Current 20 mA
Pressure 300 PSI

Product details

Manufactured byAmetek
Product typeSubmersible Level Transmitter
DescriptionAmetek 575 Series Submersible Level Transmitters | Electronic Measurement Products.The Model 575 is used in general water/wastewater applications. The transmitter is offered in a standard non-clogging snub nose end, flush diaphragm or protected flush diaphragm with flange base for sewage or sludge type media. The 575 series is CSA approved for intrinsically safe operation when used with an approved safety barrier.The sensor is designed to provide the convenience of direct submergence in many types of liquids for quick, accurate and reliable measurement. With stainless steel isolation diaphragm (standard) and all 316 stainless steel housing, these solid state instruments provide long lasting service with virtually no maintenance.The 575 Series transmitters indicate the level of liquid by continuously measuring hydrostatic pressure via its sensing element, an ion implanted silicon semiconductor chip with integral Wheatstone bridge circuit.The pressure measurement is transmitted by a 4-20 mA output signal. This design, with isolation diaphragm for media compatibility, provides for excellent linearity and repeatability, low hysteresis and long term stability with a precision accuracy at ±0.25% FS (BFSL) typical.The transmitter is easy to install. Simply lower the unit into a tank or vessel. All electronics are mounted in the submersible 316 stainless steel housing and full potting is also provided as an option. A special cable support bracket is also available to provide extra stability when used with longer cable lengths or when used in an agitated liquid. Optional steel support cable is also available for use with the support bracket.The transmitters are available calibrated for any span needed from 0-6 psi (0-13.8 ft of water, 0-.4 bar, 0-4.2 meters of water) to 300 psi (0-692 ft of water, 0-20 bar, 0-211 meters of water). The transducer is offered as a standard 2 wire, 4-20 mA device.To complete your liquid measurement and control system, consider the Model DDMC meter/controller or the complete Levelmate III system.The 575 transducer is manufactured in the United States under ISO 9001:2008 and meets ARRA.Features Low cost measurement solution, easy installation and precision accuracy Rugged 316 stainless steel construction and wetted materials resists the corrosive effects of caustic medias with excellent environmental protection, designed for continuous submersion 2 wire, 4 to 20 mA output Reverse polarity and surge protected with additional lightning and surge protectors as well as EMI protection options CSA approved for intrinsically safe operation in hazardous areas in Canada and U.S. Full potting option and desiccant available to minimize moisture effectsApplications Inventory tank measurement Ponds, rivers and lakes Lift stations and slurries or sludge Water/wastewater treatment Water wells Landfills Pump control

Manufacturer, product group, and supply

See who makes this product, where it belongs, and where available inventory may be listed.

Manufactured by Ametek View Ametek profile
Product type Submersible Level Transmitter Explore Submersible Level Transmitter
Available from Sourcing support available Start a sourcing request