StockCheck - Aggregating Everything
✓Product overview Acromag

PMC730

Acromag · Modules

Acromag PMC730

Acromag PMC730 overview

Acromag PMC730 PMC multi-function I/O module with front connector Multi-Function I/O Modules 16D/32SE channels, 16-bit A/D 8 channels, 16-bit D/A 16 TTL input/o...

Manufactured byAcromag
Part number or familyPMC730
Product groupModules

Product details

Manufactured byAcromag
Product groupModules
DescriptionAcromag PMC730 PMC multi-function I/O module with front connector Multi-Function I/O Modules
Key Features16D/32SE channels, 16-bit A/D 8 channels, 16-bit D/A 16 TTL input/outputs 32-bit counter/timer
OverviewPMC730 mezzanine modules provide a variety of I/O functions on a single plug-in card. These high-density PMC modules perform both high-speed and high-resolution A/D and D/A conversion and also handle digital I/O and counter/timer functions.Now you can conserve your precious PMC slots and still get all the I/O functionality you need. The PMC730 is designed for extreme versatility with many deluxe features to meet most applications. However, the PMC730 is still very budget-friendly. A conduction-cooled version is also available.
Analog InputInput configuration: 16 differential or 32 single-ended channels multiplexed to a single A/D converter. A/D resolution: 16 bits. Input ranges: ±3.3V, ±5V, ±10V, 0-5V, and 0-10V. Maximum throughput rate: One channel updated at a time. 1 channel (maximum): 10μS 16 channels (maximum): 160μS 32 channels (maximum): 320μS Data sample memory: 512 samples shared by all channels. A/D trigger: Internal timer, external source, software. On-board timer: One user-programmable timer for analog input acquisition control. System accuracy: ±3 LSB typ. (SW calib., gain=1, 25°C). Data format: Straight binary or binary two’s compliment. Input overvoltage protection: -40 to 55V power off. Common mode rejection ratio (60Hz): 96dB typical. Channel-to-channel rejection ratio (60Hz): 96dB typical.
Analog OutputOutput configuration: 8 single-ended channels, each controlled by its own independent D/A converter. D/A resolution: 16 bits. Output range: ±10V. Maximum throughput rate: Outputs updated simultaneously or individually. 1 channel: 12.375μS 8 different channels: 12.375μS DAC programming: Via independent channel registers or through shared FIFO. Data sample memory: 1024 sample FIFO shared by all channels. D/A trigger: Internal timer, external source, software. On-board timer: One user-programmable timer for analog output control. System accuracy: 0.0076% of 20V span max. error corrected (i.e. calibrated) at 25°C with output unloaded. Data format: Straight binary. Output at reset: 0V. Output current: -10 to 10mA (maximum). Short circuit protection: Indefinite at 25°C.
Digital I/OI/O channel configuration: 16 TTL transceivers, input/ output direction selectable on an 8-channel basis.
Digital InputInput voltage range: 0 to 5V DC. Input signal threshold: Low to high: 2.0V typical. High to low: 0.8V typical. Input response time: 250 nanoseconds. Interrupts: 16 channels of interrupts for high-to-low, low-to-high, or any change-of-state event types. Debounce: Individual debounce selectable on each channel. User-selectable (4μS, 64μS, 1mS, or 8mS).
Digital OutputOutput voltage range: 0 to 5V DC. Output ON current range: -15 to 64mA. Output pullups: 4.7K ohm socketed resistors.
Counter/TimersCounter/timer configuration: one 32-bit counter (requires use of channels 2 through 5 of digital I/O section). Functions: Watchdog timer, event counting, pulse measurement, period measurement, output waveform generation (pulse width modulation, continuous pulse, single pulse, continuous waveform). Internal clock: Programmable 1, 4, 8MHz. External clock: 3.4MHz. Input voltage range: 0 to 5V DC. Output voltage range: 0 to 5V with 4.7 ohm pull-up. Maximum of 0 to 35V with external supply.
PMC ComplianceConforms to PCI Local Bus Specification, Revision 2.2 and CMC/PMC Specification, P1386.1. 4K Memory Space Required: One Base Address Register. Signaling: 5V Compliant, 3.3V Tolerant. Interrupts (INTA#): Interrupt A is used to request an interrupt.
EnvironmentalOperating temperature: 0 to 70°C (PMC730 / R) or -40 to 85°C (PMC730E / CC). Storage temperature: -55 to 100°C. Relative humidity: 5 to 95% non-condensing. Power: 120mA at +5V. 95mA at +12V. 70mA at -12V. MTBF: 929,541 hrs. at 25°C, MIL-HDBK-217F, notice 2.

Manufacturer, product group, and supply

See who makes this product, where it belongs, and where available inventory may be listed.

Manufactured by Acromag View Acromag profile
Product group Modules Explore Modules
Available from Sourcing support available Start a sourcing request